Part Number Hot Search : 
028AEE ST78L07 BSO615NV S0720540 28010 HA2420 LBT14082 07508
Product Description
Full Text Search
 

To Download SIMID-0603-C Datasheet File

  If you can't view the Datasheet, Please click here to try to view without PDF Reader .  
 
 


  Datasheet File OCR Text:
  data sheet data sheet ? epcos ag 2008. reproduction, publication and di ssemination of this publication and the information contained therein without epc os? prior express consent is prohibited. smt inductors simid series, simid 0603-c series/type: b82496c date: march 2008
2 03/08 please read cautions and warnings and important notes at the end of this document. size 0603 (eia) and/or 1608 (iec) rated inductance 1 nh to 220 nh rated current 110 ma to 1800 ma construction copper-plated ceramic core laser-cut winding, epoxy-coated features temperature range up to 150 c high resonance frequency close inductance tolerance free of polarization effect high mechanical stability qualified to aec-q200 suitable for lead-free reflow soldering as referenced in jedec j-std 020c rohs-compatible applications resonant circuits, impedance matching for multimedia car access systems wireless communication systems tpms (tire pressure monitoring system) gps (global posi tioning system) digital cameras terminals base material al 2 o 3 ceramic with cu layer layer composition ni, sn (lead-free) electro-plated marking no marking on component minimum data on reel: manufacturer, ordering code, l value, quantity, date of packing delivery mode and packing unit 8-mm cardboard tape, wound on 180-mm ? reel bulk case on request packing unit: 4000 pcs./reel b82496c smt inductors, simid series simid 0603-c
3 03/08 please read cautions and warnings and important notes at the end of this document. dimensional drawing and layout recommendation taping and packing cardboard tape reel dimensions in mm ind0042-k 0.80.1 0.80.1 1.60.1 0.30.2 0.30.2 c b a ind0041-c a bc 0.8 0.1 2.3 0.3 0.9 0.1 dimensions in mm ?130.2 90.3 20.1 601 ind0593-l 3 180 _ ind0553-h-e 0.950.05 1.15 _ < _ +0.1 1.5 0 1.10.1 40.1 20.05 40.1 1.90.1 3.50.05 1.750.1 80.2 direction of unreeling b82496c smt inductors, simid series simid 0603-c
4 03/08 please read cautions and warnings and important notes at the end of this document. technical data and measuring conditions rated inductance l r measured with impedance analyzer agilent 4291a and test fixture agilent 16196a at frequency f l , 0.1 v, 20 c q factor q min , q typ measured with impedance analyzer agilent 4291a and test fixture agilent 16196a, q min measured at frequency f q , 20 c rated temperature t r 125 c rated current i r maximum permissible dc with a temperature increase of 15 k at rated temperature self-resonance frequency f res,min measured with network analyzer agilent 8720d, 20 c dc resistance r max measured at 20 c solderability (lead-free) sn95.5ag3.8cu0.7: (245 5) c, (5 0.3) s wetting of soldering area 95% (based on iec 60068-2-58) resistance to soldering heat 260 c, 40 s (as referenced in jedec j-std 020c) climatic category 55/150/56 (to iec 60068-1) storage conditions mounted: ?55 c ? +150 c packaged: ?25 c ? +40 c, 75% rh weight approx. 4 mg b82496c smt inductors, simid series simid 0603-c
5 03/08 please read cautions and warnings and important notes at the end of this document. characteristics and ordering codes special versions on request. higher currents possible at temperatures 6 03/08 impedance |z| versus frequency f measured with impedance analyzer agilent 4291a/16196a, typical values at 20 c q factor versus frequency f measured with impedance analyzer agilent 4291a/16196a, typical values at 20 c inductance l versus dc load current i dc measured with lcr meter agilent 4275a, typical values at 20 c current derating i op /i r versus ambient temperature t a (rated temperature t r = 125 c) ind0043-t 10 | z 6 10 7 hz 10 8 f 10 9 1 nh 220 nh 10 nh 100 nh | 10 ? 10 0 3 _ _ 2 10 10 1 _ 1 10 2 10 3 10 5 10 b82496c 10 4 ind0044-2 10 10 10 9 10 10 hz 8 7 f q 10 20 30 50 40 60 70 80 100 90 0 220 nh 100 nh 10 nh 1 nh b82496c ind0045-5 l 10 10 i 10 10 0 10 1 a nh dc 220 nh 10 _ 2 _ 1 _ 8 10 _ 7 10 _ 6 10 _ 9 10 _ 100 nh 10 nh 1 nh b82496c ind0046-l-e 0 0 0.2 0.4 0.6 0.8 1.0 1.2 i r op i a t 20 40 60 80 100 120 160 b82496c c b82496c smt inductors, simid series simid 0603-c
7 03/08 cautions and warnings please note the recommendations in our induct ors data book (latest edition) and in the data sheets. ? particular attention should be paid to the derating curves given there. ? the soldering conditions should also be observ ed. temperatures quoted in relation to wave soldering refer to the pin, not the housing. if the components are to be washed varnished it is necessary to check whether the washing varnish agent that is used has a negative effect on the wire insulation, any plastics that are used, or on glued joints. in particular, it is possib le for washing varnish agent residues to have a negative effect in the long-term on wire insulation. the following points must be observed if the components are potted in customer applications: ? many potting materials shrink as they harden. th ey therefore exert a pressure on the plastic housing or core. this pressure can have a delete rious effect on electr ical properties, and in extreme cases can damage the core or plastic housing mechanically. ? it is necessary to check whether the potting material used attacks or destroys the wire insulation, plastics or glue. ? the effect of the potting material can change the high-frequency behaviour of the components. ferrites are sensitive to direct impact. this c an cause the core material to flake, or lead to breakage of the core. even for customer-specific products , conclusive validation of the component in the circuit can only be carried out by the customer. please read cautions and warnings and important notes at the end of this document.
8 03/08 important notes the following applies to all produc ts named in this publication: 1. some parts of this publication contain statements about the suitability of our products for certain areas of application . these statements are based on our knowledge of typical requirements that are often placed on our produc ts in the areas of a pplication concerned. we nevertheless expressly point out that such statements cannot be regarded as binding statements about the suitability of our produc ts for a particular customer application. as a rule, epcos is either unfamiliar with indivi dual customer applications or less familiar with them than the customers themselves. for these reas ons, it is always ultimately incumbent on the customer to check and decide whether an epco s product with the properties described in the product specification is suitable for use in a particular customer application. 2. we also point out that in individual cases, a malfunction of passive electronic components or failure before the end of their usual servi ce life cannot be completely ruled out in the current state of the art, even if they are operated as specified. in customer applications requiring a very high level of operational safety and especially in customer applications in which the malfunction or failure of a passive elec tronic component could enda nger human life or health (e.g. in accident prevention or life-saving sys tems), it must therefore be ensured by means of suitable design of the customer application or othe r action taken by the customer (e.g. installation of protective circuitry or redundanc y) that no injury or damage is sustained by third parties in the event of malfunction or failure of a passive electronic component. 3. the warnings, cautions and produc t-specific notes must be observed . 4. in order to satisfy certain technical requirements, some of the products described in this publication may contain substances subject to restrictions in certain jurisdictions (e.g. because they are classed as hazardous) . useful information on this will be found in our material data sheets on the internet (www.epcos.com/material). should you have any more detailed questions, please contact our sales offices. 5. we constantly strive to im prove our products. consequently, the products described in this publication may change from time to time . the same is true of the corresponding product specifications. please check therefore to what extent product descriptions and specifications contained in this publicati on are still applicable before or when you place an order. we also reserve the right to discontinue production and delivery of products . consequently, we cannot guarantee that all produc ts named in this publication will always be available. the aforementioned does not apply in the case of individual agreem ents deviating from the foregoing for customer-specific products. 6. unless otherwise agreed in individual contracts, all orders are subject to the current version of the ?general terms of delivery for produc ts and services in the electrical industry? published by the german electrical and electronics industry association (zvei) . 7. the trade names epcos, baoke, alu-x, ceradiode, cssp, ctvs, dssp, miniblue, mkk, mlsc, motorcap, pcc, phasecap, phasemod, siferrit, sifi, si korel, silvercap, simdad, simid, sineformer, siov, sip5d, sip5k, thermofuse, windcap are trademarks registered or pending in europe and in other countries. further information will be found on the internet at www.epcos.com/trademarks.


▲Up To Search▲   

 
Price & Availability of SIMID-0603-C

All Rights Reserved © IC-ON-LINE 2003 - 2022  

[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy]
Mirror Sites :  [www.datasheet.hk]   [www.maxim4u.com]  [www.ic-on-line.cn] [www.ic-on-line.com] [www.ic-on-line.net] [www.alldatasheet.com.cn] [www.gdcy.com]  [www.gdcy.net]


 . . . . .
  We use cookies to deliver the best possible web experience and assist with our advertising efforts. By continuing to use this site, you consent to the use of cookies. For more information on cookies, please take a look at our Privacy Policy. X